The Nexo PS10AMP is a dedicated amplifier that
allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve
exceptional performance from such compact packages. The integrated
PS10 TD Controller provides crossover, sensed amplifier control and
system equalisation optimised for the PS10 and LS500. Like all Nexo
processors, the PS10AMP provides precision dynamic, voice coil temperature
and diaphragm displacement protection through the use of selective
Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies
when and where necessary.
The PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out. The PS10AMP Configuration switch automatically configures the unit for 2 channel mode (LSub Off), where the PS10AMP drives 2 to 4 PS10 Loudspeakers in stereo ( 2x 850 Watts/4 Ohms) or 3 channel mode (Lsub On), where the PS10 AMP drives 2 PS10 Loudspeakers in stereo (2 x 430 Watts/ 8 Ohms) and 1 LS500 Subwoofer (850W/ 4 Ohms) with a summed mono signal of the L+R input signals. Since the Configuration switch also rewires the output connectors and displays PS10AMP mode status with LED indicators, the PS10AMP minimises installation cost and complexity while ensuring faultless performance.
PRODUCT FEATURES
Precision circuits engineered for the PS10/LS500 systems permit increased sound pressure and operational reliability
Servo controlled VCEQs provide precise dynamic control without spectral imbalance
Automatically configured 2 or 3 channel modes allow the amplifier’s 1700W power capability to be optimised for a variety of system configurations
Integrated TDController simplifies wiring and provides a precise match to the amplifier
Super silent, back to front variable speed fan
Comprehensive indicators and controls, inputs and outputs are all located on the front panel
Download
Full Specs PDF
